Robe Doors

Sliding Wardrobe Doors – Frequently Asked Questions
, , ,

Sliding Wardrobe Doors – Frequently Asked Questions

Sliding Wardrobe Door

Frequently Asked Questions

  • Where are the robe doors manufactured?

All doors are manufactured in our factory at Mulwala, New South Wales. Only the best materials used and all doors must pass our quality control standards prior to leaving our factory.

  • What is included in a basic wardrobe sliding door kit?

Our wardrobe sliding doors include top and bottom tracks (with end caps for neat finish) and come with all necessary fittings for easy DIY installation including screws and no more gaps.

  • Do the doors come in standard sizes?

All our wardrobes are custom built to your measurements so there are no standard sizes. However the standard maximum width to all sliding wardrobe doors is 1200mm and maximum height is 2400mm.

  • I have a really high ceiling, what is your maximum door height?

The maximum height our sliding door wardrobes can be installed in is 2400mm. Should your ceiling height be higher than this, we can accommodate by offering a 12mm board which can go to 3000mm high.

  • What if my floor, ceiling or walls are uneven?

It’s important to ensure your floors are level. Check using a spirit level. If they are uneven, please send the smallest number to us in your order. Our wardrobes are built with some tolerance, which will allow for some minor adjustments. It is more important that the width and height measurements are accurate and you are encouraged to measure this at least twice.

  • Where can I view your wardrobes?

We have the full range of robe doors on display  in our showroom.  DIY Outlet operate out of the Simply Frameless Glass Concepts showroom in Mulwala. Our showroom is open Monday to Friday 9am to 5pm.

  • Do you have samples of the wardrobe colours?

If you cannot visit our showroom, you can view our framed lamiwood wardrobe colours on our website.

  • Do you deliver doors if required?

We can deliver your made to measure wardrobe within two weeks of ordering. We deliver through the Northern Victoria and Southern New South Wales region for an additional charge.

  • Where do i pick up my door from?

All door are to be picked up from our showroom at Shop 7 97-103 Melbourne Street Mulwala, New South Wales.

  • What if I can’t find exactly what I’m looking for?

If you have a particular design in mind or have seen something you like elsewhere we may be able to give you a quote.

  • Are the doors easy to install?

Fitting should give a good DIYer no problems at all. Only basic tools are needed and we are always on the end of the phone if you need help. Fitting instructions can be found on our website.

  • What should I do if I have carpet?

If you are installing the wardrobe doors onto carpet, ensure that when you measure, push down hard into the carpet with the tape measure to a true reading.

Simple Measuring Guide for Sliding Robe Doors
, ,

Simple Measuring Guide for Sliding Robe Doors

Below is a step-by-step guide of how to install sliding wardrobe doors. We are confident that anyone with basic DIY skills will be able to complete the whole process with ease.

TOOLS AND FIXINGS NEEDED:

Pozidrive screwdriver, measuring tape, hacksaw, bradawl, spirit level, electric drill, drill bits, screws and suitable wall plugs.

STEP 1: SIZING THE TRACKS

You will be provided with two tracks.

First measure the width of the top of your opening and use a setsquare to mark a straight line across the top track.

Second measure the width of the floor of your opening and mark a corresponding line across the floor track.

Cut the tracks using a fine tooth hack saw.

STEP 2: INSTALLING TOP & BOTTOM TRACKS

Position the top track and drill and plug into the ceiling.

Fix the top track using suitable screws and fixing (not supplied).

Note: The standard minimum size of 610mm is used as a wardrobe.

Before permanently fitting the floor track to the floor, fit the door into place and use a spirit level to ensure door is vertical.

Track will come with end caps to give a neat finish.

STEP 3: INSERTING THE DOORS

Install the back door first and install by inserting in the top track on an angle.

Straighten the door and lower the bottom wheels into the floor track grooves.

 

Measuring up for sliding wardrobe doors is simple.  Just measure the height and width of your wardrobe opening. Our sliding wardrobe doors are designed to fit your space perfectly.  Don’t worry if your opening is not completely level or parallel, our sliding wardrobes can be adjusted to compensate for these conditions.

 

To ensure the made to measure wardrobe sliding doors fit perfectly in your space, please follow these simple steps to measuring:

Step 1: Measure Height

The top track system will accommodate up to 15mm in height difference.

Measure at least three places as shown in diagram (e.g. A, B and C)

IMPORTANT – Use the smallest measurement when supplying us with height measurements.

Step 2: Measure Width

Check the walls with a spirit level to see if they bow or curve. Our optional strike plate will allow you to level up to 15mm using packers (not supplied). If you have coving and skirting you will need to remove a section of them to slide the strike plate in before installing. Measure in two places top and bottom. Please ensure you measure (A) above any skirting board and (B) below any coving that may hinder wardrobe installation.

IMPORTANT – Use the largest measurement when supplying us with width measurements.

NOTE – both top and bottom tracks are supplied over length to allow you to trim them to exact requirements.

 

General Info

We only require the dimensions of your opening space and not your door sizes. When giving us the measurements enter the largest width dimensions and the smallest height dimensions.

  • Measure the width and height of your space.  Measure ceiling to floor heights in at least three places. Check your measurements twice to ensure accuracy.
  • Use a spirit level to check your floors and ceilings are level. If not, provide us with the smaller measurement.  We can provide bottom liners to allow up to 15mm using packers. Our maximum height for our sliding wardrobes ranges is 2450mm. If your wardrobe space is taller than this, we can look at other options including providing a matching header panel.
  • We will work out all the measurements for the tracking system and frames. These are supplied with a cut over length to allow you to trim them to the exact size. If you already have a frame, please let us know so we can create the doors to fit your existing frame.
  • Maximum widths for wardrobe sliding doors are 1200mm. Two doors will be a maximum width of 2400mm, three doors will be a maximum width of 3600 and a four door kit is 4800mm.  If your space needs more than five doors, contact us for a quote.
  • You may need to think about removing skirting boards and cornices before installing which will ensure a perfect fit. If you are installing on carpet it may be best to remove a section and replace with timber. This will ensure a stable bottom track.

When installing on carpet allow for 19mm bottom x 90mm plating (painted MDF) cut holes in carpet. Fixing packers every 400mm then attach 19mm x 90mm plate across width of opening measure from top of bottom plate to bottom of head.